Invictus Coatings
Concrete Coating in Bluffdale, UT
Bluffdale sits at the southern edge of Salt Lake County where the valley floor meets the Point of the Mountain, and it's one of the fastest-growing communities in the state. New subdivisions are going up quickly, which means thousands of unfinished garage slabs, basement floors, and driveways that need proper protection before Utah's climate starts doing damage. Invictus Coatings is a Draper-based concrete coating company serving Bluffdale homeowners and businesses. We're close, we know this market, and we do the prep work that makes coatings last.
Why Bluffdale Homeowners Are Coating Their Concrete Now
Most builders in Bluffdale's newer developments finish the framing, the drywall, and the landscaping. The garage floor gets left as bare concrete. That's standard practice, and it's also a problem. Bare concrete is porous. It absorbs oil from vehicles, stains from chemicals, and moisture from snowmelt and irrigation. Over time, the surface pits, dusts, and deteriorates. Once that process starts, it's harder and more expensive to correct.
The right time to coat a concrete floor is before heavy use begins. A professionally installed coating system bonds into the slab, seals the surface, and creates a barrier that keeps your concrete looking and performing the way it should for years.
Invictus brings a full preparation and installation process to every Bluffdale job. We don't roll in with a bucket of epoxy and a roller. We grind, we test, we verify, and then we coat. That's the difference between a floor that lasts and one that peels.
What a professionally coated concrete floor delivers:
Protection against oil, chemical, and water staining from day one
A sealed surface that won't pit, dust, or deteriorate under vehicle traffic
Slip-resistant texture for safer footing in wet and winter conditions
Resistance to the freeze-thaw cycling that damages uncoated concrete in Utah winters
UV-stable color that holds up through high-altitude sun exposure
A finished appearance that adds real value when it's time to sell
Customizable colors, flake patterns, and finishes to fit your home
Our Concrete Coating Services in Bluffdale
-
The ultimate garage & commercial coating, with a 100% solids epoxy base coat, 100% coverage flake color of your choice and a Polyaspartic clear top coat. This is our most popular option for garages and warehouses, and our most economical option. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a thick self priming base coat, 100% coverage decorative flake broadcast, and a thick top coat of the industries strongest polyaspartic clear coat. 2-3 days for install, 1-2 days cure time for foot traffic, 3-6 days cure time for vehicle traffic.
-
The ultimate garage & commercial coating, with the industries strongest UV stable polyaspartic colored base coat(4x stronger than epoxy), 100% coverage flake color of your choice and a Polyaspartic clear top coat. This is our most popular option for garages, warehouses, and outdoor applications. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a thick self priming base coat, 100% coverage decorative flake broadcast, and a thick coat of polyaspartic clear top coat. 2-3 days for install, 12-24hr cure time for foot traffic, 1-3 days cure time for vehicle traffic.
-
This coating includes concrete diamond grinding, high power vacuuming before application, a deep penetrating primer coat and our highest quality polyaspartic epoxy coating that is rated for ware house heavy usage. great for packaging plants, storage warehouses and anywhere industrial.
-
Two coats of epoxy, one coat of water based epoxy primer with one 100% solids epoxy over it. fantastic waterproofing, color customizable, and high chemical resistance. Medium scratch resistance, a protective top coat is suggested.
-
Do you love the look and durability of polished concrete but it's just too expensive?! This coating resembles polished concrete, is more waterproof than polished concrete and it's easier to maintain with only half the cost! We fill the cracks of the concrete, grind it smooth and remove any stains or imperfections with grinding, then apply 2 coats of clear Water Based Urethane which is stronger, longer lasting and more uv stable than clear Water Based Epoxy or polyurethane.
-
A metallic epoxy floor is a stunning and unique flooring option that combines the durability of epoxy with the beauty of metallic pigments. The epoxy is mixed with metallic pigments, which creates a beautiful, three-dimensional effect that mimics the look of polished metal. The result is a seamless, high-gloss finish that is durable, easy to clean, and resistant to stains and scratches. Metallic epoxy floors are perfect for residential, commercial, and industrial spaces, and can be customized to fit any design style or color scheme. Whether you're looking to upgrade your garage, retail store, or office space, a metallic epoxy floor is a stylish and functional choice that is sure to impress.
-
Concrete densifying is a process that involves treating concrete surfaces with a specialized chemical solution that penetrates deep into the pores of the concrete, reacting with the minerals to create a denser, harder surface. This treatment is ideal for concrete floors that are subject to heavy traffic, wear, and tear. Concrete densifying can help to improve the durability and longevity of concrete surfaces, making them more resistant to scratches, stains, and other types of damage. It can also enhance the appearance of the concrete by creating a smoother, shinier surface. If you're looking to protect and improve the performance of your concrete floors, concrete densifying is an excellent solution to consider.
-
Utahs weather kills concrete, Seal your concrete driveway, pool deck, pavers, floors, stairs etc. All concrete must be sealed to maintain its strength and beauty. On average, int utah it must be re-sealed every 2-4 years. We offer 3 types of outdoor concrete sealant.
-Water-based sealant: This is a thin glossy clear film of sealant, suggested for driveways and pool decks. Creating a water resistant effect to protect concrete from water freezing damage.
-Solvent-based sealant (wet-look): A penetrating glossy sealant that creates a film over the substrate mimicking how it looks when its wet. This is perfect for pavers, colored concrete, stamped concrete, pool deck and coping. Makes faded colored concretes color pop once again. This is water proof and protective against salt and water damage.
-Hydrophobic lithium concrete sealer: This includes a professional concrete cleaning with a high power pressurewasher, scrubber and detergent to pull the dirt out of the concrete. Then an application of the newest and best technology in concrete sealing and densification, a lithium sealer that will make your concrete hydrophobic, meaning water will bead up on top of it rather than soak into it. This helps to protect the concrete from salt damage, spalling and cracking. Rated to last 3-5 years. This is completely invisible and not noticeable when applied.
-
The ultimate commercial coating, with the industries strongest UV stable polyaspartic colored base coat(4x stronger than epoxy), 100% coverage sand and a colored Polyaspartic top coat. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a thick self priming base coat, 100% coverage sand broadcast, and a thick coat of single color polyaspartic top coat. 2-3 days for install, 12-24hr cure time for foot traffic, 1-3 days cure time for vehicle traffic.
-
Our most economical and budget friendly coating that we do! 2 coats of our UV stable, water-base urethane. Upon request we can sprinkle color flakes throughout the topcoat. This is not a 100% broadcast to rejection, it is simply a small amount of color flakes sprinkled on. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a solid color water-based urethane base coat, a top coat of the same solid color water-based urethane, and a light coverage of colored flakes that is sprinkled into the topcoat. 1-2 days for install, 1 days cure time for foot traffic, 2-3 days cure time for vehicle traffic.
How We Install Concrete Coatings in Bluffdale
Preparation determines whether a coating lasts. Here's exactly what we do before any product touches your floor.
Why do coatings on new construction concrete sometimes fail quickly? New concrete can look solid and ready, but it often contains residual moisture and alkalinity from the curing process. If a coating goes down before those levels are within range, the bond is compromised from the start. We test before we coat, every time, on every job.
Step 1: On-Site Assessment We walk your floor and evaluate the slab condition, including surface porosity, any existing sealers applied by the builder, visible cracking, control joint condition, and signs of moisture. We tell you what we find before we recommend anything.
Step 2: Diamond Grinding We mechanically grind the entire surface using professional diamond tooling to achieve the correct surface profile. This removes any builder-applied sealers, opens the concrete's pores, and creates the mechanical bond profile the coating needs to adhere properly.
Step 3: pH and Moisture Testing We measure pH and moisture vapor emission rate before any coating is applied. New construction slabs in particular can test outside acceptable ranges. If they do, we address it before moving forward.
Step 4: Base Coat Application We apply the base coat at full specified thickness. No thinning, no shortcuts, no cutting coverage to speed up the job.
Step 5: Decorative Broadcast Color flakes, metallic pigments, or solid tints are applied at the correct coverage rate for your chosen system and finish.
Step 6: Polyaspartic Topcoat A UV-stable, clear polyaspartic topcoat seals the full system and delivers the surface hardness, chemical resistance, and abrasion tolerance that makes the floor perform long-term.
Step 7: Final Walk-Through We inspect every square foot of the completed floor with you on-site. Any issue gets corrected before we leave.
Serving Bluffdale and South Salt Lake County
Invictus Coatings is based in Draper, just minutes from Bluffdale, and we work throughout the area regularly. We serve homeowners in new developments near Redwood Road, established properties along 14400 South, and commercial spaces throughout South Salt Lake County. We come to you for a free on-site estimate, assess the floor in person, and give you a clear price before any commitment is made.
We also serve Riverton, South Jordan, Herriman, and surrounding communities across Salt Lake County. Not sure if we cover your area? Give us a call.
Call us at (801) 396-7314 or fill out our contact form to schedule your free estimate.