Invictus Coatings
Concrete Coating in Lehi, UT
Lehi is one of the fastest-growing cities in Utah, which means a lot of new concrete floors that need proper protection before they start showing the wear of Utah's climate. Invictus Coatings is a Draper-based concrete coating company that travels throughout Lehi and northern Utah County, installing professional-grade coating systems for garages, basements, and commercial spaces. We're not a franchise. We're a local crew that does the prep work right, and that's why our coatings last.
Why Lehi Homeowners Choose Professional Concrete Coating
New construction in Lehi moves fast, but builders don't finish your garage floor. They leave bare concrete. That concrete is porous, stains easily, and degrades quickly without a proper protective coating system. Whether you're in Traverse Mountain, North Pointe, or a newer community off Lehi Main Street, the question isn't whether to coat your floors. It's whether to do it right the first time or pay to have bad work redone.
Invictus uses a multi-step prep and coating process that bonds at the molecular level with your concrete. No peeling. No bubbling. No callbacks. Just a floor that performs for years and looks the part the whole time.
What a professional concrete coating does for your home:
Seals porous concrete against oil, water, and chemical stains
Creates a surface that's easy to clean with just a mop or hose
Adds slip-resistant texture for safety in garages and utility spaces
Holds up under vehicle weight, heavy equipment, and daily foot traffic
Protects against Utah's freeze-thaw cycles that crack and deteriorate uncoated concrete
Increases the visual appeal and resale value of your home
Available in dozens of colors, finishes, and flake patterns
Concrete Coating Services We Offer in Lehi
-
The ultimate garage & commercial coating, with a 100% solids epoxy base coat, 100% coverage flake color of your choice and a Polyaspartic clear top coat. This is our most popular option for garages and warehouses, and our most economical option. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a thick self priming base coat, 100% coverage decorative flake broadcast, and a thick top coat of the industries strongest polyaspartic clear coat. 2-3 days for install, 1-2 days cure time for foot traffic, 3-6 days cure time for vehicle traffic.
-
The ultimate garage & commercial coating, with the industries strongest UV stable polyaspartic colored base coat(4x stronger than epoxy), 100% coverage flake color of your choice and a Polyaspartic clear top coat. This is our most popular option for garages, warehouses, and outdoor applications. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a thick self priming base coat, 100% coverage decorative flake broadcast, and a thick coat of polyaspartic clear top coat. 2-3 days for install, 12-24hr cure time for foot traffic, 1-3 days cure time for vehicle traffic.
-
This coating includes concrete diamond grinding, high power vacuuming before application, a deep penetrating primer coat and our highest quality polyaspartic epoxy coating that is rated for ware house heavy usage. great for packaging plants, storage warehouses and anywhere industrial.
-
Two coats of epoxy, one coat of water based epoxy primer with one 100% solids epoxy over it. fantastic waterproofing, color customizable, and high chemical resistance. Medium scratch resistance, a protective top coat is suggested.
-
Do you love the look and durability of polished concrete but it's just too expensive?! This coating resembles polished concrete, is more waterproof than polished concrete and it's easier to maintain with only half the cost! We fill the cracks of the concrete, grind it smooth and remove any stains or imperfections with grinding, then apply 2 coats of clear Water Based Urethane which is stronger, longer lasting and more uv stable than clear Water Based Epoxy or polyurethane.
-
A metallic epoxy floor is a stunning and unique flooring option that combines the durability of epoxy with the beauty of metallic pigments. The epoxy is mixed with metallic pigments, which creates a beautiful, three-dimensional effect that mimics the look of polished metal. The result is a seamless, high-gloss finish that is durable, easy to clean, and resistant to stains and scratches. Metallic epoxy floors are perfect for residential, commercial, and industrial spaces, and can be customized to fit any design style or color scheme. Whether you're looking to upgrade your garage, retail store, or office space, a metallic epoxy floor is a stylish and functional choice that is sure to impress.
-
Concrete densifying is a process that involves treating concrete surfaces with a specialized chemical solution that penetrates deep into the pores of the concrete, reacting with the minerals to create a denser, harder surface. This treatment is ideal for concrete floors that are subject to heavy traffic, wear, and tear. Concrete densifying can help to improve the durability and longevity of concrete surfaces, making them more resistant to scratches, stains, and other types of damage. It can also enhance the appearance of the concrete by creating a smoother, shinier surface. If you're looking to protect and improve the performance of your concrete floors, concrete densifying is an excellent solution to consider.
-
Utahs weather kills concrete, Seal your concrete driveway, pool deck, pavers, floors, stairs etc. All concrete must be sealed to maintain its strength and beauty. On average, int utah it must be re-sealed every 2-4 years. We offer 3 types of outdoor concrete sealant.
-Water-based sealant: This is a thin glossy clear film of sealant, suggested for driveways and pool decks. Creating a water resistant effect to protect concrete from water freezing damage.
-Solvent-based sealant (wet-look): A penetrating glossy sealant that creates a film over the substrate mimicking how it looks when its wet. This is perfect for pavers, colored concrete, stamped concrete, pool deck and coping. Makes faded colored concretes color pop once again. This is water proof and protective against salt and water damage.
-Hydrophobic lithium concrete sealer: This includes a professional concrete cleaning with a high power pressurewasher, scrubber and detergent to pull the dirt out of the concrete. Then an application of the newest and best technology in concrete sealing and densification, a lithium sealer that will make your concrete hydrophobic, meaning water will bead up on top of it rather than soak into it. This helps to protect the concrete from salt damage, spalling and cracking. Rated to last 3-5 years. This is completely invisible and not noticeable when applied.
-
The ultimate commercial coating, with the industries strongest UV stable polyaspartic colored base coat(4x stronger than epoxy), 100% coverage sand and a colored Polyaspartic top coat. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a thick self priming base coat, 100% coverage sand broadcast, and a thick coat of single color polyaspartic top coat. 2-3 days for install, 12-24hr cure time for foot traffic, 1-3 days cure time for vehicle traffic.
-
Our most economical and budget friendly coating that we do! 2 coats of our UV stable, water-base urethane. Upon request we can sprinkle color flakes throughout the topcoat. This is not a 100% broadcast to rejection, it is simply a small amount of color flakes sprinkled on. Includes our industry leading state of the art preparation and installation process, with diamond grinding (edges and corners done with specialized equipment), PH testing, thorough concrete cleaning and vacuuming, a solid color water-based urethane base coat, a top coat of the same solid color water-based urethane, and a light coverage of colored flakes that is sprinkled into the topcoat. 1-2 days for install, 1 days cure time for foot traffic, 2-3 days cure time for vehicle traffic.
How We Coat Concrete Floors in Lehi
Most coating failures trace back to one thing: inadequate surface preparation. Here's what we do differently.
Why does surface prep matter so much for concrete coatings? Concrete is dense but porous. If you apply a coating over a dirty, sealed, or moisture-compromised surface, the coating sits on top instead of bonding into the concrete. It looks fine for a few months, then starts failing. Our process eliminates that risk entirely.
Step 1: Surface Inspection We assess your concrete for cracks, previous coatings, moisture intrusion, and structural condition before we recommend a system. Some floors need crack repair first. We tell you upfront.
Step 2: Diamond Grinding We use professional diamond grinding equipment to mechanically profile the surface, opening the concrete's pores so the coating bonds at depth, not just at the surface. This is the step most cheap installers skip.
Step 3: pH and Moisture Testing We test pH levels and moisture content before any coating goes down. Alkaline concrete or high moisture content will cause delamination, no matter how good the product is. We verify the numbers before we proceed.
Step 4: Base Coat Application We apply the epoxy or polyaspartic base coat at the manufacturer-specified thickness for your specific system, not thinned out to make the job faster.
Step 5: Decorative Layer Color flakes, metallic pigments, or solid tints are broadcast at the right coverage rate for the finish you've chosen.
Step 6: Polyaspartic Topcoat A clear, UV-stable polyaspartic topcoat seals the system, adds the final sheen, and delivers the abrasion resistance that makes the floor last.
Step 7: Final Walk-Through We inspect the finished floor with you on-site before we pack up. If something isn't right, we fix it before we leave.
Serving Lehi and Northern Utah County
Invictus Coatings is based in Draper and works throughout Lehi regularly. We serve homeowners and businesses in Traverse Mountain, the Thanksgiving Point corridor, North Pointe, and newer developments across northern Utah County. Getting a free on-site estimate is straightforward. We come to you, assess the space, and give you a clear number before any work begins.
We also serve Saratoga Springs, American Fork, Eagle Mountain, and surrounding Utah County communities.
Call us at (801) 396-7314 or fill out our contact form to schedule your free estimate.